Synergy Engineering

See what we mean

Home

The Disadvantage of Fibreglass Insulation

Posted by on 3:27 pm in Uncategorized | Comments Off on The Disadvantage of Fibreglass Insulation

Developed in the 1930s, fibreglass insulation has for decades been the primary go-to insulation to protect a home from both heat loss and heat gain. During winter, insulation helps hold heat14590871274_a2aeda33e6_k generated by the furnace indoors. In summer it retards the infiltration of outdoor heat to facilitate cooling by the air conditioner. Fiberglass batt insulation is the most common variety. Using a company like acornglassfibre.co.uk for your fibreglass is smart.The stacks of rolled-up blankets of pink, cotton candy-like material are a familiar sight at home centres. No type of insulation completely stops heat transfer and fibreglass has other drawbacks, as well.

Fiberglass batts are available in precut widths of 16 inches or 24 inches. Unfortunately, residential attic construction often integrates many odd-shaped nooks, crannies and other anomalies that aren’t accommodated by the standard-size format of fibreglass batts. Similarly, wall interiors contain electrical outlet boxes, conduits and other obstructions. Even a small gap in insulation that permits unrestricted flow of heat energy can reduce a wall or ceiling’s overall heat resistance, known as its R-value, by as much as 50 percent. This requires substantial manual cutting and shaping of batts into custom pieces to fit and fill all such voids, potentially making installation of fibreglass insulation a labour- and time-intensive procedure.

In addition to conduction directly through ceilings and walls, heat energy also moves through direct air exchange, such as air leaks through a ceiling into an attic. Other forms of insulation, such as loose-fill cellulose or sprayed foam, are denser and offer more effective protection against air leaks than fibreglass. Because fibreglass has low density and comes in a fluffed-up state, air passes through it readily. When installing fibreglass in an attic, you must expend time and care in advance to pinpoint and seal air leaks from living spaces below — before they are permanently hidden by a layer of insulation. This includes minute structural cracks as well as gaps around any ceiling light fixtures, HVAC ducts and electrical conduits that penetrate the attic.

Fiberglass insulation is particularly vulnerable to moisture. Unlike alternatives such as foam board or sprayed foam insulation, wet fibreglass insulation loses all R-value and has almost no insulating properties until it dries out. Moisture may contaminate insulation in attics — a primary location for fibreglass batts — due to persistent roof leaks or from simple condensation as moist warm air from living spaces below accumulates in the attic and condenses when temperatures drop at night, saturating the insulation.

When moisture is present in fibreglass insulation, mold growth frequently follows. This is more prevalent in fibreglass than in alternatives such as loose-fill cellulose, because cellulose does not allow the free flow of air that transports mold spores and delivers moisture. Airborne mold spores that settle in the fibres of fibreglass insulation thrive when exposed to moisture from water vapor in the air or condensation. Mold can be a source of unhealthy indoor air quality and produce allergic symptoms in susceptible individuals.

Wine Storage Ideas You’ll Love

Posted by on 3:06 pm in Uncategorized | Comments Off on Wine Storage Ideas You’ll Love

3029865848_4b14293715_bWithout any kind of specialised equipment or modifications, the kitchen, garage and storage sheds are the worst places to keep your wine. The kitchen is one of the hottest places in the house, it also tends to be very well lit. It is subject to temperature fluctuations every time the stove or oven is being used and it contains lots of appliances that emit heat and vibrations. Cellars with cellarmaison.com is ideal!

Garages and storage sheds are rarely temperature controlled, so they tend to be very hot in summer, and very cold in winter. These places are generally not very clean, they may smell musty and have rodents that can chew wine packaging, corks and labels (not good if you want to sell your wine). They also tend to contain strong smelling substances like gasoline, solvents, paint and cleaning solutions whose odours can work their way into the wine through the cork.

Most people know that the basement is the ideal place to store their wine. Custom cellars with cellarmaison.com is the best idea. It’s usually cool, dark and damp, but don’t take these conditions for granted. If your basement is not completely underground, store your wines against a subterranean wall. Measure the temperature, humidity and temperature fluctuations so you know the conditions you’re dealing with (see below).

Make sure the basement is clean and free of strong-smelling odours. If the basement is particularly damp, don’t keep the wine stacked on the floor, especially if it’s in cardboard boxes. You should consider building or buying a wine rack system.

Wine racks can be bought prefabricated or as low-cost, do-it-yourself kits. Materials usually consist of stainless steel, wire grids or wood. Although stainless steel and wire grids are cheap, they are the least desirable because they tend to bend under the weight of the bottle, rust in humid conditions unless treated, and cause hot or cold spots through heat conduction.

Redwood is the best wine rack material because it’s naturally odour-free, doesn’t require staining or finishing (eliminating chemical off-gassing that might harm the wine), resists rot and mildew, and is strong relative to it’s weight so it doesn’t bend easily.

Softwoods such as Pine and Douglas fir are more prone to warping under moist conditions (unless sealed). But, they are good, low-cost options, mainly because they’re easier to work with and lighter to ship than hardwoods. What do you do if you don’t have a basement? This is a popular question with newbies just learning how to store wine. First, look for closets, or other storage spaces in the interior of the house or apartment (i.e. away from exterior walls so they stay cool). Closets or storage spaces under stairs usually work well. If you can’t find an interior space, choose one against a shaded or northern wall. Refrigerators are great at preserving perishables for short periods of time. They are not meant for long-term wine storage. Don’t confuse preservation of an unfinished bottle of wine (for a few days or a week) with ageing wine. Refrigerators are simply too cold, they maintain temperatures of 40°F or less, and as mentioned above, very little if any aging occurs at these temperatures.

10 Tips for Moving Offices

Posted by on 2:57 pm in Uncategorized | Comments Off on 10 Tips for Moving Offices

Renting your first office space can be an exciting turning point for your business. But choosing just any office would be a mistake. You need to make sure that your office is one that will support your team and allow you to grow and thrive. Below are things to consider before renting your first office space.

Get Help From an Expert

The process of looking for office space can be overwhelming for a newbie. But if you find a commercial real estate agent or broker who is familiar with the properties in the area, they can make the whole process a lot easier. Ask around or search on an online portal like occupa.co.uk  to find someone in your target community.

Find a Secure Building

The building itself should offer some amenities as well. To keep you, your employees and your equipment safe and secure, find out if the building has a security guard, manned entry way and after-hours security.

Choose a Space That Fits Your Team

Modern office

Modern office

Of course, you will need a large enough space for the members of your team to each have a desk or place to sit. But you don’t want something so large that you’re paying for entire rooms that you never use.

But Leave Some Room to Grow

However, a bit of extra space can be a good thing, especially if you plan to grow within the length of your lease. Even a few extra cubicle spaces or some room to add a few desks can be helpful.

Decide How You Want the Office Laid Out

Do you want an open concept or more closed-off work spaces? Different bosses and teams have different preferences. So think about what style with occupa.co.uk would suit your team best and choose an office that lends itself to your preferred layout.

Know Exactly in What Condition You’ll Receive the Space

Some offices don’t always come as advertised. And some might require a bit of work before you actually move your things in. If you want to know exactly what the space will look like if you actually decide to rent it, you have to ask those questions.

Consider Parking and Bike Storage

Parking is another important factor that might be overlooked when renting your first office space. You need to make sure there are enough parking spaces nearby so that your team can actually get to work on time without much hassle. A secure parking lot or dedicated area is a plus. Or if you’re in an area where there are more bikers, make sure there’s a rack or enough space somewhere in the building for employees to store their bikes.

Think About How the Office Will Appear to Others

Like it or not, your office sends a message to others about your business. If you choose a building that’s falling apart, that could tell clients that you’re struggling. But if you overextend your budget with a lavish space for your first office, they could think that they’re paying you too much.

Have a Place to Meet

Aside from just desks or cubicles, you’ll need to think about some other spaces that could be useful to your team. Do you need a dedicated conference room or a few smaller meeting rooms? Do you need a kitchen or any other specific types of spaces?

Know What You’re Allowed to Customize

You likely want to make your first office your own. But most landlords probably don’t want you knocking down walls and completely changing their buildings. So before you sign anything, see what you’re allowed to do to the space without them charging you for damages.

10 Tips for Moving Offices

Posted by on 2:40 pm in Uncategorized | Comments Off on 10 Tips for Moving Offices

Renting your first office space can be an exciting turning point for your business. But choosing just any office would be a mistake. You need to make sure that your office is one that will support your team and allow you to grow and thrive. Below are things to consider before renting your first office space.

Get Help From an Expert

The process of looking for office space can be overwhelming for a newbie. But if you find a commercial real estate agent or broker who is familiar with the properties in the area, they can make the whole process a lot easier. Ask around or search on an online portal like occupa.co.uk  to find someone in your target community.

Find a Secure Building

The building itself should offer some amenities as well. To keep you, your employees and your equipment safe and secure, find out if the building has a security guard, manned entry way and after-hours security.DSC_1168

Choose a Space That Fits Your Team

Of course, you will need a large enough space for the members of your team to each have a desk or place to sit. But you don’t want something so large that you’re paying for entire rooms that you never use.

But Leave Some Room to Grow

However, a bit of extra space can be a good thing, especially if you plan to grow within the length of your lease. Even a few extra cubicle spaces or some room to add a few desks can be helpful.

Decide How You Want the Office Laid Out

Do you want an open concept or more closed-off work spaces? Different bosses and teams have different preferences. So think about what style with http://www.occupa.co.uk would suit your team best and choose an office that lends itself to your preferred layout.

Know Exactly in What Condition You’ll Receive the Space

Some offices don’t always come as advertised. And some might require a bit of work before you actually move your things in. If you want to know exactly what the space will look like if you actually decide to rent it, you have to ask those questions.

Consider Parking and Bike Storage

Parking is another important factor that might be overlooked when renting your first office space. You need to make sure there are enough parking spaces nearby so that your team can actually get to work on time without much hassle. A secure parking lot or dedicated area is a plus. Or if you’re in an area where there are more bikers, make sure there’s a rack or enough space somewhere in the building for employees to store their bikes.

Think About How the Office Will Appear to Others

Like it or not, your office sends a message to others about your business. If you choose a building that’s falling apart, that could tell clients that you’re struggling. But if you overextend your budget with a lavish space for your first office, they could think that they’re paying you too much.

Have a Place to Meet

Aside from just desks or cubicles, you’ll need to think about some other spaces that could be useful to your team. Do you need a dedicated conference room or a few smaller meeting rooms? Do you need a kitchen or any other specific types of spaces?

Know What You’re Allowed to Customize

You likely want to make your first office your own. But most landlords probably don’t want you knocking down walls and completely changing their buildings. So before you sign anything, see what you’re allowed to do to the space without them charging you for damages.

White Space? What IS IT?

Posted by on 2:31 pm in Uncategorized | Comments Off on White Space? What IS IT?

15676198677_c031c990cc_kBefore we answer that, let’s quickly go over what white space is with designers like mdrcreative.co.uk. Basically, it’s all the space between the words and pictures. And it doesn’t have to be white. In the example below, the white space is actually blue.

Professional designers like mdrcreative.co.uk actively employ white space. It’s not just the space left over after everything has been placed on the page; it’s a separate design element. There are many reasons why they do this. Here are a few of the more important ones:

1. It separates elements on a page.

This the fundamental reason to use white space. Without it, your page would look cluttered and messy, readers wouldn’t be able to tell what words relate to the images, and it would be hard to read (so it probably wouldn’t be read). Even using white space badly doesn’t solve those dilemmas – you need to use it properly. This makes it very ‘busy’, like everything is coming at you at once, and, for me, it’s like getting punched in the eye.

2. It creates focus and makes things stand out.

White space, generally, is rather blank. There is nothing to look at. If it surrounds something, that something really stands out. If your brand has a minimalist look, all of your advertising might take this approach. Look at the example below. What do you focus on the most?

3. As we hinted at point 1, it improves readability.

All other things being equal, words that stand out will be read more often than words that don’t. Also, words that are easy to read will be read more often than words that aren’t. Therefore, it pays to make the most important words stand out and easy to read. The example above, while the focus is on the image, also illustrates that words surrounded by space are easy to read.

4. It helps to create balance.

There are many things to think about when trying to create a balanced image: size, shape, colour, contrast, etc. Adding white space is a great way to balance different-sized objects on your page. You see, a balanced design doesn’t mean symmetrical. A large design element with mdrcreative.co.uk can be balanced by a few smaller ones, which is where white space can come in handy. In contrast, an unbalanced image can look, well, wrong. It’s illogical. It makes the eyes dart all over the place. And you see it a lot in the work of amateurs (below on the left). Adding the right amount of white space in the right places can make your page balanced, neat, and attractive (below on the right). The picture below, on the left, is crammed and there is stuff all over the place.

White Space? How Important Is It?

Posted by on 2:14 pm in Uncategorized | Comments Off on White Space? How Important Is It?

Before we answer that, let’s quickly go over what white space is with designers like mdrcreative.co.uk. Basically, it’s all the space between the words and pictures. And it doesn’t have to be white. In the example below, the white space is actually blue.31

Professional designers like mdrcreative.co.uk actively employ white space. It’s not just the space left over after everything has been placed on the page; it’s a separate design element. There are many reasons why they do this. Here are a few of the more important ones:

1. It separates elements on a page.

This the fundamental reason to use white space. Without it, your page would look cluttered and messy, readers wouldn’t be able to tell what words relate to the images, and it would be hard to read (so it probably wouldn’t be read). Even using white space badly doesn’t solve those dilemmas – you need to use it properly. This makes it very ‘busy’, like everything is coming at you at once, and, for me, it’s like getting punched in the eye.

2. It creates focus and makes things stand out.

White space, generally, is rather blank. There is nothing to look at. If it surrounds something, that something really stands out. If your brand has a minimalist look, all of your advertising might take this approach. Look at the example below. What do you focus on the most?

3. As we hinted at point 1, it improves readability.

All other things being equal, words that stand out will be read more often than words that don’t. Also, words that are easy to read will be read more often than words that aren’t. Therefore, it pays to make the most important words stand out and easy to read. The example above, while the focus is on the image, also illustrates that words surrounded by space are easy to read.

4. It helps to create balance.

There are many things to think about when trying to create a balanced image: size, shape, colour, contrast, etc. Adding white space is a great way to balance different-sized objects on your page. You see, a balanced design doesn’t mean symmetrical. A large design element with mdrcreative.co.uk can be balanced by a few smaller ones, which is where white space can come in handy. In contrast, an unbalanced image can look, well, wrong. It’s illogical. It makes the eyes dart all over the place. And you see it a lot in the work of amateurs (below on the left). Adding the right amount of white space in the right places can make your page balanced, neat, and attractive (below on the right). The picture below, on the left, is crammed and there is stuff all over the place.

What Is Structural Steel Fabrication?

Posted by on 2:05 pm in Uncategorized | Comments Off on What Is Structural Steel Fabrication?

5937079422_01b9298c08_oStructural steel fabrication is the process of cutting, bending and shaping steel alloy to create a product. Unlike various types of welding in which steel alloy is repaired or strengthened, steel fabrication takes many pieces of metal and attaches them together in the form of a predefined shape and size. Structural steel fabrication requires a skilled technician who is experienced in taking raw components and transforming them into marketable items, thus there is very little room for mistakes. Fabrication is a must in heavy industrial projects. Even at home, if you want to build a small footbridge, walkway or a staircase, you will need the help of steel fabricators. The companies like hatchengineeringltd.co.uk that work in a variety of projects, from building homes to fire escapes, door frames or tower legs. They utilise machinery to bend and weld steel in order to give it different shapes and patterns. This fabrication process includes three steps:

  • Cutting (done by sawing or shearing or chiselling using the tools like plasma torches, laser cutters or water jets);
  • Bending (done through hammering which can be either manual or machine powered, depending on the project), and
  • Assembling of the molded metal parts to create complete structures (done through welding where steel fabricators slowly apply heat to steel parts to join them together. Assembling can also be done by riveting of threaded fasteners or binding together with adhesives).

After the procession of the steel, fabricators need to determine its shape. There are two factors that play a role in this, the software package and the available equipment in the machine shop. Most metal fabrication companies prefer using cutting-edge technology to keep track of the operation and maintain the proficiency of the process. Most companies rely on laser steel-cutting devices for acquiring a smooth edge for superior accuracy, as the steel fabricator equipment is equally essential. Galvanizing, sand blasting, and painting may also be used during structural steel fabrication.

Welding is the main focus of the structural steel fabrication process. The cut or bent metal parts or machine-made parts need to be assembled, and this is done by welding. Following the detailed designs by a structural engineer, welders complete the fabrication process. After the welding, the structure is sand blasted and primed and finally painted. Before it is shipped to the customer, the finished product needs to be inspected properly to ensure quality.

From vehicular parts and bridges to household appliances, structural steel fabrication makes the world a more comfortable place by providing strong and durable material.

10 Tips for Moving Offices

Posted by on 10:38 am in Uncategorized | Comments Off on 10 Tips for Moving Offices

Renting your first office space can be an exciting turning point for your business. But choosing just any office would be a mistake. You need to make sure that your office is one that will support your team and allow you to grow and thrive. Below are things to consider before renting your first office space.

Get Help From an Expert

The process of looking for office space can be overwhelming for a newbie. But if you find a commercial real estate agent or broker who is familiar with the properties in the area, they can make the whole process a lot easier. Ask around or search on an online portal like occupa.co.uk  to find someone in your target community.

Find a Secure BuildingDSC_1168

The building itself should offer some amenities as well. To keep you, your employees and your equipment safe and secure, find out if the building has a security guard, manned entry way and after-hours security.

Choose a Space That Fits Your Team

Of course, you will need a large enough space for the members of your team to each have a desk or place to sit. But you don’t want something so large that you’re paying for entire rooms that you never use.

But Leave Some Room to Grow

However, a bit of extra space can be a good thing, especially if you plan to grow within the length of your lease. Even a few extra cubicle spaces or some room to add a few desks can be helpful.

Decide How You Want the Office Laid Out

Do you want an open concept or more closed-off work spaces? Different bosses and teams have different preferences. So think about what style with http://www.occupa.co.uk would suit your team best and choose an office that lends itself to your preferred layout.

Know Exactly in What Condition You’ll Receive the Space

Some offices don’t always come as advertised. And some might require a bit of work before you actually move your things in. If you want to know exactly what the space will look like if you actually decide to rent it, you have to ask those questions.

Consider Parking and Bike Storage

Parking is another important factor that might be overlooked when renting your first office space. You need to make sure there are enough parking spaces nearby so that your team can actually get to work on time without much hassle. A secure parking lot or dedicated area is a plus. Or if you’re in an area where there are more bikers, make sure there’s a rack or enough space somewhere in the building for employees to store their bikes.

Think About How the Office Will Appear to Others

Like it or not, your office sends a message to others about your business. If you choose a building that’s falling apart, that could tell clients that you’re struggling. But if you overextend your budget with a lavish space for your first office, they could think that they’re paying you too much.

Have a Place to Meet

Aside from just desks or cubicles, you’ll need to think about some other spaces that could be useful to your team. Do you need a dedicated conference room or a few smaller meeting rooms? Do you need a kitchen or any other specific types of spaces?

Know What You’re Allowed to Customize

You likely want to make your first office your own. But most landlords probably don’t want you knocking down walls and completely changing their buildings. So before you sign anything, see what you’re allowed to do to the space without them charging you for damages.

10 Tips for Moving Offices

Posted by on 10:25 am in Uncategorized | Comments Off on 10 Tips for Moving Offices

Renting your first office space can be an exciting turning point for your business. But choosing just any office would be a mistake. You need to make sure that your office is one that will support your team and allow you to grow and thrive. Below are things to consider before renting your first office space.

Get Help From an Expert

The process of looking for office space can be overwhelming for a newbie. But if you find a commercial real estate agent or broker who is familiar with the properties in the area, they can make the whole process a lot easier. Ask around or search on an online portal like occupa.co.uk  to find someone in your target community.

Find a Secure Building

The building itself should offer some amenities as well. To keep you, your employees and your equipment safe and secure, find out if the building has a security guard, manned entry way and after-hours security.DSC_1168

Choose a Space That Fits Your Team

Of course, you will need a large enough space for the members of your team to each have a desk or place to sit. But you don’t want something so large that you’re paying for entire rooms that you never use.

But Leave Some Room to Grow

However, a bit of extra space can be a good thing, especially if you plan to grow within the length of your lease. Even a few extra cubicle spaces or some room to add a few desks can be helpful.

Decide How You Want the Office Laid Out

Do you want an open concept or more closed-off work spaces? Different bosses and teams have different preferences. So think about what style with http://www.occupa.co.uk would suit your team best and choose an office that lends itself to your preferred layout.

Know Exactly in What Condition You’ll Receive the Space

Some offices don’t always come as advertised. And some might require a bit of work before you actually move your things in. If you want to know exactly what the space will look like if you actually decide to rent it, you have to ask those questions.

Consider Parking and Bike Storage

Parking is another important factor that might be overlooked when renting your first office space. You need to make sure there are enough parking spaces nearby so that your team can actually get to work on time without much hassle. A secure parking lot or dedicated area is a plus. Or if you’re in an area where there are more bikers, make sure there’s a rack or enough space somewhere in the building for employees to store their bikes.

Think About How the Office Will Appear to Others

Like it or not, your office sends a message to others about your business. If you choose a building that’s falling apart, that could tell clients that you’re struggling. But if you overextend your budget with a lavish space for your first office, they could think that they’re paying you too much.

Have a Place to Meet

Aside from just desks or cubicles, you’ll need to think about some other spaces that could be useful to your team. Do you need a dedicated conference room or a few smaller meeting rooms? Do you need a kitchen or any other specific types of spaces?

Know What You’re Allowed to Customize

You likely want to make your first office your own. But most landlords probably don’t want you knocking down walls and completely changing their buildings. So before you sign anything, see what you’re allowed to do to the space without them charging you for damages.

White Space? How Important Is It?

Posted by on 10:19 am in Uncategorized | Comments Off on White Space? How Important Is It?

Before we answer that, let’s quickly go over what white space is with designers like mdrcreative.co.uk. Basically, it’s all the space between the words and pictures. And it doesn’t have to be white. In the example below, the white space is actually blue.

Professional designers like mdrcreative.co.uk actively employ white space. It’s not just the space left over after everything has been placed on the page; it’s a separate design element. There are many reasons why they do this. Here are a few of the more important ones:

1. It separates elements on a page.31

This the fundamental reason to use white space. Without it, your page would look cluttered and messy, readers wouldn’t be able to tell what words relate to the images, and it would be hard to read (so it probably wouldn’t be read). Even using white space badly doesn’t solve those dilemmas – you need to use it properly. This makes it very ‘busy’, like everything is coming at you at once, and, for me, it’s like getting punched in the eye.

2. It creates focus and makes things stand out.

White space, generally, is rather blank. There is nothing to look at. If it surrounds something, that something really stands out. If your brand has a minimalist look, all of your advertising might take this approach. Look at the example below. What do you focus on the most?

3. As we hinted at point 1, it improves readability.

All other things being equal, words that stand out will be read more often than words that don’t. Also, words that are easy to read will be read more often than words that aren’t. Therefore, it pays to make the most important words stand out and easy to read. The example above, while the focus is on the image, also illustrates that words surrounded by space are easy to read.

4. It helps to create balance.

There are many things to think about when trying to create a balanced image: size, shape, colour, contrast, etc. Adding white space is a great way to balance different-sized objects on your page. You see, a balanced design doesn’t mean symmetrical. A large design element with mdrcreative.co.uk can be balanced by a few smaller ones, which is where white space can come in handy. In contrast, an unbalanced image can look, well, wrong. It’s illogical. It makes the eyes dart all over the place. And you see it a lot in the work of amateurs (below on the left). Adding the right amount of white space in the right places can make your page balanced, neat, and attractive (below on the right). The picture below, on the left, is crammed and there is stuff all over the place.

www.scriptsell.netBest Premium Wordpress Theme/Best Premium Wordpress Theme/